How to Maintain Your Motorbike and Keep It Running Smoothly
Maintaining your motorbike is a crucial step to take if you intend to maximize its lifespan and usability. Be it those with robust large engines or those with delicate portable engines, care is the way to ensure your bike stays as good or nearly good as new. This goes for its functionality as much as it goes for its garb. So, what are the key steps to take to ensure your motorbike runs smoothly? You may want to dig into this article to find them.
Check the Fluids of Your Motorbike
It’s important to make sure that your motorcycle is well-oiled and all of its fluids are topped up. This includes oil, brake fluid, coolant, and clutch fluid.
To check the oil level, start by parking the motorcycle on a level surface. Then, locate the dipstick or filler cap on your motorcycle engine. Take a clean rag and wipe it off before checking the level. The oil should be between the two lines on the dipstick. If it’s low, add more oil until it reaches the correct level.
Also, ensure your motorbike has enough coolant in its system. Usually, you do this by locating its coolant reservoir and taking out its cap. At this point, you should be able to notice if more coolant is needed or not. If needed, add a 50/50 mix of water and coolant until it reaches the correct level.
Lastly, don’t forget to examine your motorbike’s clutch fluid. You can do this by checking for a small reservoir usually found near the handlebars. Open its cap and check for color and consistency by taking out a few drops of the fluid. The fluid should be odorless and clear. A dark or burnt look indicates the need for a fluid change, which should be done to avoid damaging the clutch in time.
Check the Tires of Your Motorbike
Checking the tires of your motorcycle is an important part of regular maintenance. So, if you haven’t done so in a while — especially since the last month — you may want to check your tires for signs of damage such as the following:
- Uneven tread wear
- Cracks in the sidewalls
- Bulges in the tread
- Tread depth that is too low
- Cuts, cracks, or gouges
- Foreign objects embedded in the tire
Low tire pressure can cause poor handling, which could result in an accident. So, when inflating the tires, it’s best to use a reliable tire pressure gauge to ensure accuracy.
Check the Battery of Your Motorbike
The battery is an essential part of the electrical system and can often be overlooked when servicing your bike. To check the battery, you’ll need to remove the seat and inspect the terminals and connections. Check for any corrosion or fraying of the wires, and make sure all connections are tight and secure. If you find any signs of wear or damage, it’s best to replace the battery as soon as possible.
Once the connections have been inspected, you’ll want to check the charge level of the battery. You can do this by using a multimeter or by consulting the owner’s manual for the exact instructions. If the charge level is low, it’s best to charge the battery using a specialized charger.
It’s also important to ensure that your bike is switched off during the charging process.
Ensure to keep your battery in a clean and dry environment, free from extreme temperatures, as overheating can damage your battery. Additionally, if your battery is more than three years old, it’s likely time to replace it with a new one.
Check the Brakes of Your Motorbike
Keeping your brakes in good condition is essential for safe riding. Inspect the brake pads to make sure they are not worn too thin, and if they are, replace them. The brake levels must be checked and topped off if essential. Make sure all the connections are secure, and that none of the hoses are frayed or cracked. Finally, check the brake lines for any signs of corrosion or leakage. If you find anything that needs to be addressed, take your bike to a certified mechanic.
Lubricate the Chain of Your Motorbike
If you want your motorcycle to run smoothly, it is important to keep the chain properly lubricated. If the chain is not lubricated, it will rust and become dry, causing the bike to operate less efficiently and possibly leading to damage over time. The best way to ensure that the chain is properly lubricated is to use a good-quality motorcycle chain lubricant.
Clean Your Motorbike
Cleaning your motorbike is an important part of the maintenance process and should be done regularly. Cleaning your bike not only helps it look better but can also help prevent rust, corrosion, and other damage from occurring.
Every part of a bike needs cleaning starting from the exterior to the interior. The engine and exhaust system can be cleaned using a degreaser. Other materials such as the brush, mild detergents, and damp clothes are used when cleaning a motorbike.
To clean the wheels, use a wheel cleaner and soft cloth to remove road grime and brake dust. A tire shine can then be used to make them look glossy and new.
When motorbikes hit the road, they go through bumps, dust, dirt, and humidity, which can cause rust or corrosion. So, keeping your motorbike in the best shape possible is a routine to make regular. Just like any functional machine, motorbikes require frequent maintenance that spans body cleaning to fluid checks, lubrication of its engine and other rotary mechanical parts, as well as wheel and tire checks. Also, getting on this routine is a way to keep your motorbike functional for a longer lifespan, thus maximizing your budget expended when purchasing it.